ScreenPro Urine Drug Test Cup

We would advise new users to watch the video below and read the short, step by step Instructions for Use guide, before taking the ScreenPro Urine Drug Test Cup exam. If you are a returning customer or an experienced collection officer, you could go straight to the on-line exam.

Go Straight to The On-Line Quiz

 

Instructions for use ScreenPro Urine Drug Test Cup

The ScreenPro Urine Drug Test Cup is a qualitative point of care screening device for the rapid detection of  drugs and metabolites in human urine.

  1. Before using the ScreenPro Urine Drug Test Cup, bring it up to room temperature between 15-30 degrees C
  2. Carefully inspect the packet to ensure it is intact. Do not use if opened, damaged or torn
  3. Check the Expiry Date and only use if in date
  4. Tear open the foil packet and remove the cup. Place the silica desiccant pouch and packet to one side
  5. Hand the cup to the donor and ask them to supply a urine specimen. We recommend enough specimen to half fill the cup.  Always ask the donor to secure the lid before handing it back, check the lid is secure
  6. Check the sample temperature is within normal range, between 32-38 degrees C, by reading the green area shown on the temperature control strip
  7. If the specimen is not within this range a new sample should be taken in a new cup
Interpreting the results
  1. Remove the privacy label from the front of the cup
  2. You will see that the ScreenPro Urine drug test Cup, tests for 1 drug per strip making it easy to read. Each strip has its own control line and test line
  3. Make sure the control line at the top of the strip is visible. This indicates the strip has worked correctly
Positive also known as Non-Negative Results

The presence of a reddish-purple line in the top C position and no line in the bottom T position, on any of the test strips, indicate a Non-Negative result for that drug.  Non-Negative results should be read at 5 min.  All Non-Negative results should be sent to a suitably accredited laboratory for confirmation analysis where required.

Non Negative Result

 

Negative Results

The presence of a reddish-purple line in the top C position and again in the bottom T position on any of the test strips, indicate a Negative result for that drug.  Negative results can be read as soon as both Control and Test lines are visible on each strip

Negative Result

 

Invalid

If a control line fails to appear on any individual test strip, the test result is invalid and should be repeated with a new cup.

Invalid

Please Note: It is normal for the line intensity to vary.  Any line, regardless of the intensity, colour or size, should be read as a line.   The results will remain stable for up to 60 minutes

Please contact us if you need anymore information regarding the use of this product.